Stable, Secure Toilet Attachment
At just 0.2 inches, the SimpleSpa is one of the thinnest attachments on the market. Its thin profile keeps your toilet seat level, unlike thicker attachments. This not only reduces the unsightly gap between your toilet seat and toilet bowl, it also eliminates the stress points that can cause seat cracking.
SafeCore Ceramic Internal Valve
The SimpleSpa’s durable brass and ceramic internal components won’t corrode or wear down and are protected by the sonic-sealed outer shell. This secure attachment body offers multiple layers of leak protection.
|Adjustable Water Pressure
Customize your wash experience with a quick turn of the control knob.
High Quality Components
The SimpleSpa comes with everything for a quick, easy installation, including a durable braided metal hose and metal t-valve.
Features like the nozzle guard and retractable nozzle ensure that your wash is always clean and hygienic.
Bidet Attachment Toilet Fit Information
The PureSpa, FreshSpa, and SimpleSpa lines of bidet attachments fit nearly all standard Round and Elongated toilet bowls, including most one-piece and curved toilet fixtures (commonly referred to as French Curve). Refer to the fit diagram below for exact specifications for fitting the bidet attachment to your fixture.
Bolt holes must be between 5-1/4 inches and 8 inches apart. You will also need at least 3/4 inch clearance from the center of the bolt holes to the back of the toilet tank.
Fixtures with Curved Tanks (French Curve Fixtures)
- Measure 2-1/4 inches in a straight line from the center of either bolt hole to the edge of the toilet fixture (shown as A in the diagram below).
- Measure from Point A (established in the step above) towards the toilet tank. You will need at least 3/4" of clearance (shown as B in the diagram below) in order for the FreshSpa to fit on your toilet.
SimpleSpa Thinline Bidet Installation
Installing your SimpleSpa Thinline Bidet is easy! If you have questions, or run into any problems, contact our Customer Service department at 888-542-3355
Brondell Bidet Attachment FAQs
General Bidet Attachment Questions
Which of your attachments use cold water, and which use hot and cold water?
The FreshSpa FS-10, PureSpa PS-65, SimpleSpa SS-150, and EasySpa LES-10 bidet attachments use only cold water. The FreshSpa FSW-20 and PureSpa PSW-75 Dual Temperature bidet attachments can be used with just cold or hot and cold water.
Which of your bidet attachments are non-electric?
All of Brondell's bidet attachments are non-electric.
How do I install my attachment?
Installation videos for the attachments can be found HERE.
When I use the bidet, water is coming out of the toilet bowl up my back. Is there something wrong?
It sounds like you need to change the nozzle position of the bidet. Please watch our Installation Video HERE for more information. When the bidet is installed properly, the bidet should spray the center of your body and water should not come out of the toilet bowl.
When I first installed my bidet it worked great! But now water is just spraying straight down in to the toilet bowl. How can I fix this?
It sounds like you've lost the nozzle cap of your bidet. Please contact Brondell customer support at 888-542-3355.
After installing my new bidet my toilet isn't working like it used to. What's wrong?
During installation it is possible to accidentally rotate the toilet fill valve, which can misalign the toilet tank's internal components. Remove the toilet tank lid and ensure all parts of the flushing assembly are lined up properly, and that the flush handle controls the flushing mechanism. When installed properly, the bidet has no effect on the performance or flushing of the toilet.
The cold water valve provided doesn't match my shut-off valve. Do you have alternate valves available?
The provided cold water 7/8" T-valve is designed to install directly under your toilet tank at the fill valve, not at the shut-off valve at the wall. Follow the flex hose to the bottom of the toilet tank, and then unscrew the flex hose from the toilet. This is where the 7/8"T-valve is installed. However, if you have a skirted toilet or very limited access to the area under your toilet tank, we have alternate 3/8"cold water valves available for the FreshSpa models HERE.
Dual Temperature Bidet Attachments (FSW-20 and PSW-75)
I see that the hot hose for the FreshSpa and PureSpa Dual Temperature bidet is made of clear plastic. How safe is that?
The hot tubing is specially manufactured with thermoplastic polyurethane, capable of withstanding boiling temperatures of 100 degrees Celsius at 156.2 psi. These specifications should work for most home installations.
My sink is further than six feet from my toilet. Do you have longer hot water tubing available?
Yes, we do have longer lengths available. Please contact Brondell Customer Service at 888-542-3355 for additional information.
How do the FreshSpa and PureSpa Dual Temperature bidets get hot water? Do they heat the water?
The FreshSpa and PureSpa Dual Temperature bidets hook up to the hot water supply at your sink in your bathroom. Please watch our Installation Video HERE for more information.
Is it possible to not connect my Dual Temperature bidet to hot water and only use it with cold water?
Yes! To use only cold water the FreshSpa FSW-20, only hook up the cold water side. To use only cold water with the PureSpa PSW-75, cover the hot water connection at the back of the bidet with the Hot Water Supply Cap, supplied with the bidet
Ambient Temperature Bidet Attachments (FS-10, PS-65, SS-150, and LES-10)
Can I use this bidet with hot water?
Unfortunately, no. Our Ambient Temperature Bidets can only be used with cold water. For a similar bidet that uses both hot and cold water, please see our Dual Temperature Bidet Attachments - FSW-20 and PSW-75.
SimpleSpa SS-150 Thinline Bidet Attachment Documentation
Specification Sheet (PDF)
Owner's Manual (PDF)
Why Are Brondell Products the Best?
Quality - Brondell products are made of the highest-quality materials available. From the most durable internal components to the highest standards of manufacturing, we work hard to bring you the best product available at an affordable price. We test every single item that comes off our production lines to ensure it works like it's supposed to - the first time, and every time.
Features - Compare our list of features for any one of our products to any similar product, and you'll see that Brondell delivers the most and best features for the lowest price. Unlike some of our competitors who list many features at suspect prices (a combination that almost always results in poor quality and inadequate customer and product support), Brondell offers the most possible features without ever comprising our own or our products' integrity.
Experience - Brondell is a leading innovator in the home and bathroom appliance category. We have been manufacturing and selling high-quality bidet seats and home products since 2003, and have several generations of product experience and customer feedback to best guide our designers. Our product & company reviews are a testament to this.
Peace of Mind - Purchasing a bidet product or home appliance can be a confusing and complicated process, especially with so many brands and features to choose from. Invest in a quality product and you will end up not only saving money, but time and frustration as well. Rest assured, with Brondell you are making the best choice possible for overall product quality, features, value, and - most importantly - support. Call us, shoot us an email, or contact us via live chat on our website - we are here if you ever need us.