PureSpa PSW-75 Dual Temperature Bidet
Say goodbye to toilet paper and experience the new clean!
The Brondell PureSpa Dual Temperature bidet attachment is a simple and inexpensive way to retrofit your existing toilet into a hygienic bidet in minutes. Why go back to dry irritating toilet paper or expensive baby wipes when you can use the PureSpa Dual Temperature bidet attachment! The easy to use controls allow for adjustable water pressure - from a gentle wash to a concentrated stream while the wash nozzle has full adjustability for the bidet wash (both temperature and position) ensuring accurate coverage for all types of users.
PureSpa Dual Temperature Features
- FULLY ADJUSTABLE BIDET ATTACHMENT for easy toilet fit & all body types. Simple DIY - installs in minutes!
- CERAMIC CORE INTERNAL VALVE with patented Unibody design for better safety and no leaks like the competition
- SELF-CLEANING ADJUSTABLE BIDET NOZZLE that retracts for advanced hygiene in the bathroom
- WARM WATER TEMPERATURE AND PRESSURE CONTROLS with simple intuitive control panel and backflow prevention
- PREMIUM QUALITY YOU CAN TRUST from the leader in bidet products - Brondell
THE BRONDELL PURESPA BIDET ATTACHMENT UTILIZES:
YOUR BIDET NEEDS TO BE ABLE TO HIT THE RIGHT SPOT, OTHERWISE WHAT'S THE POINT?
ADVANCED BIDET HYGIENE
You buy a bidet for cleanliness. The PureSpa's nozzle is self-cleaning, so all you have to do is worry about cleaning yourself.
In addition, the bidet nozzle automatically retracts to ensure it's out of the way until it is needed.
BUILT WITH SAFETY IN MIND
The PureSpa Dual Temp bidet attachment features ceramic core internal valves to better-withstand water pressure.
In addition, the PureSpa employs a patented Unibody Construction - fewer parts means less chance of a leak or failure.
WHAT'S IN THE BOX?
Bidet Attachment Toilet Fit Information
The PureSpa and FreshSpa lines of bidet attachments fit nearly all standard Round and Elongated toilet bowls, including most one-piece and curved toilet fixtures (commonly referred to as French Curve). Refer to the fit diagram below for exact specifications for fitting the bidet attachment to your fixture.
Bolt holes must be between 5-1/4 inches and 8 inches apart. You will also need at least 3/4 inch clearance from the center of the bolt holes to the back of the toilet tank.
Fixtures with Curved Tanks (French Curve Fixtures)
- Measure 2-1/4 inches in a straight line from the center of either bolt hole to the edge of the toilet fixture (shown as A in the diagram below).
- Measure from Point A (established in the step above) towards the toilet tank. You will need at least 3/4" of clearance (shown as B in the diagram below) in order for the PureSpa or FreshSpa to fit on your toilet.
PureSpa Dual Temperature Bidet Attachment PSW-75 Installation Video
The PureSpa Dual Temperature bidet attachment is a snap to install – usually requiring 20 minutes or less. The PureSpa is compatible with all standard 2 piece toilet fixtures and even fits many contoured one piece toilets. PureSpa is manufactured with high quality ABS plastic and has a full body panel making it simple to keep clean.
Brondell Bidet Attachment FAQs
General Bidet Attachment Questions
Which of your attachments use cold water, and which use hot and cold water?
The FreshSpa (FS-10) and PureSpa (PS-65) Easy Bidet Attachments use only cold water. The FreshSpa (FSW-20) and PureSpa (PSW-75) Dual Temperature bidet can be used with just cold or hot and cold water.
Which of your bidet attachments are non-electric?
All of Brondell's bidet attachments are non-electric.
How do I install my attachment?
Installation videos for the attachments can be found HERE.
When I use the bidet, water is coming out of the toilet bowl up my back. Is there something wrong?
It sounds like you need to change the nozzle position of the bidet. Please watch our Installation Video HERE for more information. When the bidet is installed properly, the bidet should spray the center of your body and water should not come out of the toilet bowl.
When I first installed my bidet it worked great! But now water is just spraying straight down in to the toilet bowl. How can I fix this?
It sounds like you've lost the nozzle cap of your bidet. Please contact Brondell customer support at 888-542-3355.
After installing my new bidet my toilet isn't working like it used to. What's wrong?
During installation it is possible to accidentally rotate the toilet fill valve, which can misalign the toilet tank's internal components. Remove the toilet tank lid and ensure all parts of the flushing assembly are lined up properly, and that the flush handle controls the flushing mechanism. When installed properly, the bidet has no effect on the performance or flushing of the toilet.
The cold water valve provided doesn't match my shut-off valve. Do you have alternate valves available?
The provided cold water 7/8" T-valve is designed to install directly under your toilet tank at the fill valve, not at the shut-off valve at the wall. Follow the flex hose to the bottom of the toilet tank, and then unscrew the flex hose from the toilet. This is where the 7/8"T-valve is installed. However, if you have a skirted toilet or very limited access to the area under your toilet tank, we have alternate 3/8"cold water valves available for the FreshSpa models HERE.
Dual Temperature Bidet Attachments (FSW-20 and PSW-75)
I see that the hot hose for the FreshSpa and PureSpa Dual Temperature bidet is made of clear plastic. How safe is that?
The hot tubing is specially manufactured with thermoplastic polyurethane, capable of withstanding boiling temperatures of 100 degrees Celsius at 156.2 psi. These specifications should work for most home installations.
My sink is further than six feet from my toilet. Do you have longer hot water tubing available?
Yes, we do have longer lengths available. Please contact Brondell Customer Service at 888-542-3355 for additional information.
How do the FreshSpa and PureSpa Dual Temperature bidets get hot water? Do they heat the water?
The FreshSpa and PureSpa Dual Temperature bidets hook up to the hot water supply at your sink in your bathroom. Please watch our Installation Video HERE for more information.
Is it possible to not connect my Dual Temperature bidet to hot water and only use it with cold water?
Yes! To use only cold water the FreshSpa Dual Temperature bidet (FSW-20), only hook up the cold water side. To use only cold water with the PureSpa Dual Temperature bidet (PSW-75), cover the hot water connection at the back of the bidet with the Hot Water Supply Cap, supplied with the bidet
Easy Bidet Attachments (FS-10 and PS-65)
Can I use this bidet with hot water?
Unfortunately, no. Our Easy Bidet Attachments can only be used with cold water. For a similar bidet that uses both hot and cold water, please see our Dual Temperature Bidet Attachments - FSW-20 and PSW-75.
PureSpa Dual Temperature Bidet Attachment PSW-75 Documentation
Specification Sheet (PDF)
Owner's Manual (PDF)
Why Are Brondell Products the Best?
Quality - Brondell products are made of the highest-quality materials available. From the most durable internal components to the highest standards of manufacturing, we work hard to bring you the best product available at an affordable price. We test every single item that comes off our production lines to ensure it works like it's supposed to - the first time, and every time.
Features - Compare our list of features for any one of our products to any similar product, and you'll see that Brondell delivers the most and best features for the lowest price. Unlike some of our competitors who list many features at suspect prices (a combination that almost always results in poor quality and inadequate customer and product support), Brondell offers the most possible features without ever comprising our own or our products' integrity.
Experience - Brondell is a leading innovator in the home and bathroom appliance category. We have been manufacturing and selling high-quality bidet seats and home products since 2003, and have several generations of product experience and customer feedback to best guide our designers. Our product & company reviews are a testament to this.
Peace of Mind - Purchasing a bidet product or home appliance can be a confusing and complicated process, especially with so many brands and features to choose from. Invest in a quality product and you will end up not only saving money, but time and frustration as well. Rest assured, with Brondell you are making the best choice possible for overall product quality, features, value, and - most importantly - support. Call us, shoot us an email, or contact us via live chat on our website - we are here if you ever need us.